F81867
This is the 15th byte of the block read protocol.
I2C_DATA5
R/W
This byte is also used as the 6th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
5VSB
8’h00
TSI Temperature 5 – Index E6h
Bit
Name
R/W
Reset Default
Description
This is the high byte of Intel temperature interface DIMM1 reading. The
range is 0~255ºC.
TSI_TEMP5
R
5VSB
5VSB
-
To access this byte, MCH_BANK_SEL should be set to “0”.
7-0
This is the 16th byte of the block read protocol.
I2C_DATA6
R/W
This byte is also used as the 7th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
8’h00
TSI Temperature 6 – Index E7h
Bit
Name
R/W
Reset Default
Description
This is the high byte of Intel temperature interface DIMM2 reading. The
range is 0~255ºC.
TSI_TEMP6
R
5VSB
5VSB
-
To access this byte, MCH_BANK_SEL should be set to “0”.
7-0
This is the 17th byte of the block read protocol.
I2C_DATA7
R/W
This byte is also used as the 8th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
8’h00
TSI Temperature 7 – Index E8h
Bit
Name
R/W
Reset Default
Description
This is the high byte of Intel temperature interface DIMM3 reading. The
range is 0~255ºC. The above 9 bytes could also be used as the read
data of block read protocol if the TSI is disable or pending.
TSI_TEMP7
R
5VSB
5VSB
-
7-0
This is the 18th byte of the block read protocol.
I2C_DATA8
R/W
This byte is also used as the 9th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
8’h00
I2C Data Buffer 9 – Index E9h
Bit
Name
R/W
Reset Default
Description
This is the 18th byte of the block read protocol.
7-0
I2C_DATA9
R/W
This byte is also used as the 9th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
5VSB
FFh
51
Dec, 2011
V0.12P