F81867
0: Disable SMI event.
5
4
3
2
1
0
GPIO15_SMI_EN
GPIO14_SMI_EN
GPIO13_SMI_EN
GPIO12_SMI_EN
GPIO11_SMI_EN
GPIO10_SMI_EN
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
0
0
0
0
0
0
1: Enable SMI event via PME# or SIRQ if GPIO15_SMI_ST is set.
0: Disable SMI event.
1: Enable SMI event via PME# or SIRQ if GPIO14_SMI_ST is set.
0: Disable SMI event.
1: Enable SMI event via PME# or SIRQ if GPIO13_SMI_ST is set.
0: Disable SMI event.
1: Enable SMI event via PME# or SIRQ if GPIO12_SMI_ST is set.
0: Disable SMI event.
1: Enable SMI event via PME# or SIRQ if GPIO11_SMI_ST is set.
0: Disable SMI event.
1: Enable SMI event via PME# or SIRQ if GPIO10_SMI_ST is set.
GPIO1 SMI Status Register ⎯ Index E9h
Bit
Name
R/W Reset Default
Description
0: No SMI event.
7
GPIO17_SMI_ST
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
R/W 5VSB
0
0
0
0
0
0
0
0
1: A SMI event will set if GPIO17 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
6
5
4
3
2
1
0
GPIO16_SMI_ST
GPIO15_SMI_ST
GPIO14_SMI_ST
GPIO13_SMI_ST
GPIO12_SMI_ST
GPIO11_SMI_ST
GPIO10_SMI_ST
1: A SMI event will set if GPIO16 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
1: A SMI event will set if GPIO15 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
1: A SMI event will set if GPIO14 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
1: A SMI event will set if GPIO13 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
1: A SMI event will set if GPIO12 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
1: A SMI event will set if GPIO11 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
0: No SMI event.
1: A SMI event will set if GPIO10 input is changed.
This bit is available in input mode. Write “1” to this bit will clear the status.
153
Dec, 2011
V0.12P