F75113
If the GPIO32 pin inverse was selected, the output signal would
2
1
0
GP32_ PINV
GP31_ PINV
GP30_ PINV
R/W
R/W
R/W
0
0
0
be inversed.
If the GPIO31 pin inverse was selected, the output signal would
be inversed.
If the GPIO30 pin inverse was selected, the output signal would
be inversed.
8.2.11 GPIO3X Edge Detector Enable Register ⎯ Index 48h
Bit
Name
R/W Default
Description
Enable GPIO37 Edge Detector. If this bit set to 1 and GPIO37
set to input mode (40h) will enable GPIO37 edge detection.
Default is disabled.
7
EN_GP37EDGE R/W
EN_GP36EDGE R/W
EN_GP35EDGE R/W
EN_GP34EDGE R/W
EN_GP33EDGE R/W
EN_GP32EDGE R/W
EN_GP31EDGE R/W
EN_GP30EDGE R/W
0
0
0
0
0
0
0
0
Enable GPIO36 Edge Detector. If this bit set to 1 and GPIO36
set to input mode (40h) will enable GPIO36 edge detection.
Default is disabled.
6
5
4
3
2
1
0
Enable GPIO35 Edge Detector. If this bit set to 1 and GPIO35
set to input mode (40h) will enable GPIO35 edge detection.
Default is disabled.
Enable GPIO34 Edge Detector. If this bit set to 1 and GPIO34
set to input mode (40h) will enable GPIO34 edge detection.
Default is disabled.
Enable GPIO33 Edge Detector. If this bit set to 1 and GPIO33
set to input mode (40h) will enable GPIO33 edge detection.
Default is disabled.
Enable GPIO32 Edge Detector. If this bit set to 1 and GPIO32
set to input mode (40h) will enable GPIO32 edge detection.
Default is disabled.
Enable GPIO31 Edge Detector. If this bit set to 1 and GPIO31
set to input mode (40h) will enable GPIO31 edge detection.
Default is disabled.
Enable GPIO30 Edge Detector. If this bit set to 1 and GPIO30
set to input mode (40h) will enable GPIO30 edge detection.
Default is disabled.
- 58 -
Dec,2011
V0.13P
FINTEK [ FEATURE INTEGRATION TECHNOLOGY INC. ]
