F75113
Enable GPIO10 input de-bounce with 10u (Maximum, when
input signal and detected clock is synchronicity) or 25ms
(Maximum, when input signal and detected clock is
synchronicity) second that selected by 2Ch bit0.
0
GP10_ ENDB
R/W
0
8.2.34 GPIO1X Pin Inverse Enable Register ⎯ Index 27h
Bit
Name
R/W Default
Description
If the GPIO17 pin inverse was selected, the output signal would
be inversed.
7
GP17_ PINV
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
0
0
0
0
0
0
0
0
If the GPIO16 pin inverse was selected, the output signal would
be inversed.
6
5
4
3
2
1
0
GP16_ PINV
GP15_ PINV
GP14_ PINV
GP13_ PINV
GP12_ PINV
GP11_ PINV
GP10_ PINV
If the GPIO15 pin inverse was selected, the output signal would
be inversed.
If the GPIO14 pin inverse was selected, the output signal would
be inversed.
If the GPIO13 pin inverse was selected, the output signal would
be inversed.
If the GPIO12 pin inverse was selected, the output signal would
be inversed.
If the GPIO11 pin inverse was selected, the output signal would
be inversed.
If the GPIO10 pin inverse was selected, the output signal would
be inversed.
8.2.35 GPIO1X Edge Detector Enable Register ⎯ Index 28h
Bit
Name
R/W Default
Description
Enable GPIO17 Edge Detector. If this bit set to 1 and GPIO17
set to input mode (20h) will enable GPIO17 edge detection.
Default is disabled.
7
EN_GP17EDGE R/W
EN_GP16EDGE R/W
0
0
Enable GPIO16 Edge Detector. If this bit set to 1 and GPIO16
set to input mode (20h) will enable GPIO16 edge detection.
Default is disabled.
6
- 39 -
Dec,2011
V0.13P
FINTEK [ FEATURE INTEGRATION TECHNOLOGY INC. ]
