F71869A
The 4th BOUNDARY temperature for VT2 in temperature mode.
When VT2 temperature is exceed this boundary, FAN2 expected
value will load from segment 4 register (index BDh).
When VT2 temperature is below this boundary – hysteresis, FAN2
expected value will load from segment 5 register (index BEh).
This byte is a 2’s complement value ranging from -128ºC ~ 127ºC.
1Eh
7-0
BOUND4TMP2 R/W
(30ºC)
6.6.81 FAN2 SEGMENT 1 SPEED COUNT – Index BAh
Bit
Name
R/W Default
Description
The meaning of this register is depending on the FAN2_MODE(CR96)
2’b00: The value that set in this byte is the relative expect fan speed
% of the full speed in this temperature section.
Ex:
FFh
R/W
7-0
SEC1SPEED2
100%:full speed: User must set this register to 0.
60% full speed: (100-60)*32/60, so user must program 21 to this reg.
X% full speed: The value programming in this byte is Î (100-X)*32/X
2’b01: The value that set in this byte is mean the expect PWM
duty-cycle in this temperature section.
(100%)
6.6.82 FAN2 SEGMENT 2 SPEED COUNT – Index BBh
Bit
Name
R/W Default
Description
The meaning of this register is depending on the FAN2_MODE(CR96)
2’b00: The value that set in this byte is the relative expect fan speed
% of the full speed in this temperature section.
D9h
R/W
7-0
SEC2SPEED2
(85%)
2’b01: The value that set in this byte is mean the expect PWM
duty-cycle in this temperature section.
6.6.83 FAN2 SEGMENT 3 SPEED COUNT Register – Index BCh
Bit
Name
R/W Default
Description
The meaning of this register is depending on the
FAN2_MODE(CR96)
2’b00: The value that set in this byte is the relative expect fan speed
% of the full speed in this temperature section.
2’b01: The value that set in this byte is mean the expect PWM
duty-cycle in this temperature section.
B2h
R/W
7-0
SEC3SPEED2
(70%)
6.6.84 FAN2 SEGMENT 4 SPEED COUNT Register – Index BDh
Bit Name R/W Default
Description
100
Oct., 2011
V0.19P