FTLX3815M3xx DWDM XFP Product Specification – Nov 2014
F i n i s a r
XI. Notes & Exceptions
The FTLX3815 product family has the following exceptions to the XFP MSA;
o Initialize time of 2 sec maximum (MSA requires 300ms).
XFI loopback operation:
o When XFI Loopback is enabled, the Transmitter output is disabled.
o When Line Loopback is enabled, the Receiver input is disabled.
8.5Gb/s operation requires configuration change via I2C vendor reserved
command.
XIII. References
2.
10 Gigabit Small Form Factor Pluggable Module (XFP) Multi-Source Agreement
(MSA), Rev 4.5 – August 2005. Documentation is currently available at
http://www.xfpmsa.org/
3.
4.
Application Note AN-2035: “Digital Diagnostic Monitoring Interface for XFP
Optical Transceivers” – Finisar Corporation, December 2003
Directive 2002/95/EC of the European Council Parliament and of the Council,
“on the restriction of the use of certain hazardous substances in electrical and
electronic equipment”. January 27, 2003.
5.
“Application Note AN-2038: Finisar Implementation Of RoHS Compliant
Transceivers”, Finisar Corporation, January 21, 2005.
Rev.: A04
Page 22 of 23
1174161
This document contains proprietary and confidential information to Finisar Corp. This document and the entire information
contained herein, and any other tangible representation thereof, is not to be copied, reproduced, duplicated, distributed, or
modified, in whole or in part, and/or used without the expressed written consent of Finisar Corp.
Printed copy may not be the latest revision please refer to Agile for current revision
FINISAR [ FINISAR CORPORATION. ]
