FTLF1519P1xNL Pluggable SFP Product Specification – December 2005
V.
General Specifications
Parameter
Symbol
BR
BER
L
MAX1
L
MAX2
Min
1062
Typ
Max
2125
10
-12
Units
Ref.
Mb/sec 1
2
km
3, 4
km
3, 4
Data Rate
Bit Error Rate
Max. Supported Link Length on
9/125μm SMF @ 2X Fibre Channel
Max. Supported Link Length on
9/125μm SMF @ Gigabit Ethernet
76
88
Notes:
1. Gigabit Ethernet and 1x/2x Fibre Channel compliant.
2. Tested with a PRBS 2
7
-1 test pattern.
3. Dispersion limited per FC-PI Rev. 13
4. Attenuation of 0.25 dB/km is used for the link length calculations. Distances are indicative only and
are calculated solely on link budget. A 2dB penalty is included for dispersion on >2Gb/s data rates.
Please refer to the Optical Specifications in Table IV to calculate a more accurate link budget based on
specific conditions in your application.
VI.
Environmental Specifications
Finisar 1550nm SFP transceivers have an extended operating temperature range from
–5°C to +85°C case temperature.
Parameter
Case Operating Temperature
Storage Temperature
Symbol
T
op
T
sto
Min
-5
-40
Typ
Max
85
85
Units
°C
°C
Ref.
VII.
Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
Copies of the referenced certificates are available at Finisar Corporation upon request.
©
Finisar Corporation December 15, 2005 Rev A
Page 5
FINISAR [ FINISAR CORPORATION. ]
