Pilot Datasheet v2.5
PREFERRED ASSEMBLY INSTRUCTIONS:
ORDERING INFORMATION:
PART NUMBER
DESCRIPTION
GaAs devices are fragile and should be
handled with great care. Specially designed
collets should be used where possible.
Die in Waffle-pack
FMA3058-000-WP
(Gel-pak available on request)
The recommended die attach is gold/tin
eutectic solder under a nitrogen atmosphere.
Stage temperature should be 280-290°C;
maximum time at temperature is one minute.
The recommended wire bond method is
thermo-compression wedge bonding with 0.7
or 1.0 mil (0.018 or 0.025 mm) gold wire.
Stage temperature should be 250-260°C.
Bonds should be made from the die first and
then to the mounting substrate or package.
The physical length of the bondwires should be
minimised especially when making RF or
ground connections.
HANDLING
PRECAUTIONS:
To avoid damage to the devices care should
be exercised during handling.
Proper
Electrostatic Discharge (ESD) precautions
should be observed at all stages of storage,
handling, assembly, and testing.
These
devices should be treated as Class 0 (0-250 V)
as defined in JEDEC Standard No. 22-A114.
Further information on ESD control measures
can be found in MIL-STD-1686 and MIL-
HDBK-263.
APPLICATION NOTES & DESIGN DATA:
Application Notes and design data including S-
parameters are available on request.
DISCLAIMERS:
This product is not designed for use in any
space based or life sustaining/supporting
equipment.
6
Specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Tel: +44 (0) 1325 301111
Fax: +44 (0) 1325 306177
Email: sales@filcs.com
Website: www.filtronic.com