ESMT
M12S128168A
Write command
( CS , CAS , WE = Low, RAS = High)
If the mode register is in the burst write mode, this command sets the burst start
address given by the column address to begin the burst write operation. The first
write data in burst can be input with this command with subsequent data on following
clocks.
CBR (auto) refresh command
( CS , RAS , CAS = Low, WE ,
CKE = High)
This command is a request to
begin the CBR refresh operation. The
refresh address is generated internally.
Before executing CBR refresh, all
banks must be precharged.
After this cycle, all banks will be in
the idle (precharged) state and ready
for a row activate command.
During tRC period (from refresh
command to refresh or activate
command), the M12L128168A cannot
accept any other command.
Read command
( CS , CAS = Low, RAS , WE = High)
Read data is available after CAS latency requirements have been met.
This command sets the burst start address given by the column address.
Elite Semiconductor Memory Technology Inc.
Publication Date: Apr. 2008
Revision: 1.1
15/45
ESMT [ ELITE SEMICONDUCTOR MEMORY TECHNOLOGY INC. ]
