EFST
F49L004UA / F49L004BA
8. ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature
with Power Applied. . . . . . . .. . . . . . –65°C to +125°C
Voltage with Respect to Ground
2. Minimum DC input voltage on pins A9,
,
OE
is -0.5 V. During voltage
transitions, A9, and may
and
RESET
,
OE
RESET
overshoot V to –2.0 V for periods of up to 20
SS
ns. See Figure 1. Maximum DC input voltage
on pin A9 is +12.5 V which may overshoot to
14.0 V for periods up to 20 ns.
VCC (Note 1) . . . . . . . . . . .–0.5 V to +4.0 V
A9,
,
OE
and
(Note 2) …. . . .. . . . . –0.5 V to +12.5 V
RESET
3. No more than one output may be shorted to
ground at a time. Duration of the short circuit
should not be greater than one second.
All other pins (Note 1). . . . . . . . . . –0.5 V to VCC +0.5 V
Output Short Circuit Current (Note 3) .. . .. 200 mA
Notes:
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is
a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to absolute maximum rating
conditions for extended periods may affect device
reliability.
1. Minimum DC voltage on input or I/O pins
is –0.5 V. During voltage transitions, input or
I/O pins may overshoot V to
SS
–2.0 V for periods of up to 20 ns. See Figure 1.
Maximum DC voltage on input or I/O pins is
V
CC
+0.5 V. During voltage transitions, input or
I/O pins may overshoot to V
CC
periods up to 20 ns. See Figure 2.
+2.0 V for
Figure 1. Maximum Negative Overshoot Waveform
20ns
20ns
+0 . 8 V
- 0. 5V
- 2. 0V
20ns
Figure 2. Maximum Positive Overshoot Waveform
20ns
Vc c
+ 2 . 0 V
Vc c
+ 0 . 5 V
2. 0V
20ns
20ns
Elite Flash Storage Technology Inc.
Publication Date : Sep. 2003
Revision: 1.0 17/46
ESMT [ ELITE SEMICONDUCTOR MEMORY TECHNOLOGY INC. ]
