欢迎访问ic37.com |
会员登录 免费注册
发布采购

S1D13506 参数 Datasheet PDF下载

S1D13506图片预览
型号: S1D13506
PDF下载: 下载PDF文件 查看货源
内容描述: S1D13506彩色LCD / CRT / TV控制器 [S1D13506 Color LCD/CRT/TV Controller]
分类和应用: 电视控制器
文件页数/大小: 696 页 / 5934 K
品牌: EPSON [ EPSON COMPANY ]
 浏览型号S1D13506的Datasheet PDF文件第424页浏览型号S1D13506的Datasheet PDF文件第425页浏览型号S1D13506的Datasheet PDF文件第426页浏览型号S1D13506的Datasheet PDF文件第427页浏览型号S1D13506的Datasheet PDF文件第429页浏览型号S1D13506的Datasheet PDF文件第430页浏览型号S1D13506的Datasheet PDF文件第431页浏览型号S1D13506的Datasheet PDF文件第432页  
Page 10  
Epson Research and Development  
Vancouver Design Center  
ERROR: Not enough memory for LCD/CRT/TV in 4/8/16 bits-per-pixel.  
13506SHOW is unable to change the color depth due to insufficient display buffer memory.  
Memory requirements depend on:  
the display resolution(s).  
the bit-per-pixel depth(s).  
whether a half-frame buffer is required.  
the number of displays active (LCD or LCD and CRT/TV).  
ERROR: PCI bridge adapter not found.  
The Windows PCI driver did not find the PCI Bridge Adapter.  
ERROR: PCI driver not found.  
The Windows PCI driver is not loaded.  
ERROR: Program not configured for LCD/CRT/TV. Run 13506CFG and configure for  
LCD/CRT/TV.  
The program was configured by 13506CFG for a display device that is not available. This typically  
occurs if the wrong command line was entered for the current configuration.  
WARNING: CLKI frequency not in HAL table. Program assumes that external oscillator is  
used.  
WARNING: CLKI2 frequency not in HAL table. Program assumes that external oscillator is  
used.  
The correct frequency was not found in the HAL table used to program the clock synthesizer. An  
external oscillator may be in use. This warning message will not stop the program.  
WARNING: CRT/TV only available in LANDSCAPE mode.  
SwivelViewis only available on LCD only configurations.  
ERROR: b= option cannot be used with /noinit.  
The command line options b= and /noinit are contradictory, since b= instructs the program to change  
the color depth and /noinit indicates that no register changes are to be made.  
ERROR: Continual screen read will not work with the /a switch.  
ERROR: Continual screen write will not work with the /a switch.  
The /a switch automatically cycles through the different color depths, whereas the continual screen  
read/write goes into an infinite loop to read/write memory.  
ERROR: Do not select 4 BPP LCD in SwivelView90 or SwivelView270 degrees.  
SwivelView90 and SwivelView270 are available only in 8 and 16 bits-per-pixel modes.  
S1D13506  
X25B-B-002-03  
13506SHOW Demonstration Program  
Issue Date: 01/02/06  
 复制成功!