Page 6
Epson Research and Development
Vancouver Design Center
13506SHOW Examples
13506SHOW is designed to both demonstrate and test some of the features of the
S1D13506. The following examples show how to use the program in both instances.
Using 13506SHOW For Demonstration
1. To show color patterns which must be manually stepped through, type the following:
13506SHOW
The program displays the default color depth and display surface as selected in
13506CFG. Press any key to go to the next screen. Once all screens are shown the pro-
gram exits. To exit the program immediately press the Esc key.
2. To show color patterns which automatically step through all color depths beginning
with the default color depth (as selected in 13506CFG), type the following:
13506SHOW /a
The program will display the default color depth. Each screen is shown for
approximately 1 second before the next screen is automatically shown. The program
exits after the last screen is shown. To exit the program immediately press
CTRL+BREAK.
3. To show a color pattern for a specific color depth on the LCD, type the following:
13506SHOW bl=[mode]
where mode = 4, 8, 15, or 16.
The program displays the requested screen and then exits.
Note
If a monochrome LCD panel is used, the image is formed using only the green
component of the Look-Up Table.
4. To show a color pattern for a specific color depth on the CRT, type the following:
13506SHOW bc=[mode]
where mode = 4, 8, 15, or 16.
The program display the requested screen and then exits.
S1D13506
X25B-B-002-03
13506SHOW Demonstration Program
Issue Date: 01/02/06
EPSON [ EPSON COMPANY ]
