EM65101
128COM/160SEG 16 Gray Scale Level LCD Driver
Pin
Used
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Six times boosting
RL = 500KΩ (VOUT-VSS)
VOUT1
6*VEE *0.95 6*VEE *0.98 6*VEE *0.99
V
*9
Five times boosting
RL = 500KΩ (VOUT-VSS)
VOUT2
VOUT3
VOUT4
VOUT5
IDD1
5*VEE *0.95 5*VEE *0.98 5*VEE *0.99
4*VEE *0.95 4*VEE *0.98 4*VEE *0.99
3*VEE *0.95 3*VEE *0.98 3*VEE *0.99
2*VEE *0.95 2*VEE *0.98 2*VEE *0.99
270
V
V
V
V
*10
*11
*12
*13
Booster output
voltage on VOUT
pin
Four times boosting
RL = 500KΩ (VOUT-VSS)
Three times boosting
RL = 500KΩ (VOUT-VSS)
Two times boosting
RL = 500KΩ(VOUT-VSS)
VDD = 3V, 6 times booster
All ON pattern
µA *14
µA *15
Current
consumption
VDD = 3V, 6 times booster
Checker pattern
IDD2
VBA
VREF
V0
380
VBA output voltage
VDD =2.4V~3.3V
VDD = 2.4 ~ 3.3V
VDD = 2.4 ~ 3.3V
1.5
2.0
V
V
V
*16
*17
-
VREF output
voltage
1.5
V0
V0 output voltage
0.99*V0
1.01*V0
*1 D0-D7, CSB, RS, M86, RDB, WRB, CK, CKS, P/S, RESB, TEST pins
*2 D0~D7 pins
*3 CLK pins
*4 CSB, RS, M86, RDB, WRB, CK, CKS, P/S, RESB, TEST pins
*5 Applied when D0~D7 are in high impedance state
*6 SEG0~SEGA159, COM0~COM127 pins Resistance when applied 0.5V between each output pin and each power
supply (V0, V1, V2, V3, V4) and when applied 1/12 bias
*7 VDD pin, VDD pin current without loading when the internal oscillating clock stops and CSB=VDD
*8 Oscillating frequency when the built-in oscillating circuit (16 gray scale level display mode) is used
*9 VOUT pin. When the built-in oscillating circuit, the built-in power supply, and the voltage (boosted 6 times) are
used, this pin is applied. When VEE = 2.4 ~ 3.3V, the electronic control is set to code (“1 1 1 1 1 1 1”).
Measuring conditions: bias=1/4~1/13, 1/128 duty, without loading. RL=500 KΩ (between VOUT and VSS),
C1=C2=1.0µF, C3=0.1µF, DCON=AMPON=”1,” BF=”11”
*10 VOUT pin. When the built-in oscillating circuit, the built-in power supply, and the voltage (boosted 5 times) are
used, this pin is applied. When VEE = 2.4 ~ 3.3V, the electronic control is set to code (“1 1 1 1 1 1 1”).
Measuring conditions: bias=1/4~1/13, 1/128 duty, without loading. RL=500 KΩ (between VOUT and VSS),
C1=C2=1.0µF, C3=0.1µF, DCON=AMPON=”1,” BF=”11”
*11 VOUT pin. When the built-in oscillating circuit, the built-in power supply, and the voltage (boosted 4 times) are
used, this pin is applied. When VEE = 2.4 ~ 3.3V, the electronic control is set to code (“1 1 1 1 1 1 1”).
Measuring conditions: bias=1/4~1/13, 1/128 duty, without loading. RL=500 KΩ (between VOUT and VSS),
C1=C2=1.0µF, C3=0.1µF, DCON=AMPON=”1,” BF=”11”
Product Specification (V0.4) 08.15.2005
• 65
(This specification is subject to change without further notice)
ELAN [ ELAN MICROELECTRONICS CORP ]
