EM65101
128COM/160SEG 16 Gray Scale Level LCD Driver
AYI
0
AXI
0
Select Address Increment Operation
Remark
Address is not incremented
X-Address is incremented
Y-Address is incremented
X and Y both are incremented
*1
*2
*3
*4
0
1
1
0
1
1
*1 Regardless of AIM, no increment for the AX and AY registers.
*2 Depending on the setting of AIM, address X automatically changes.
Transition of AX Register
00H 01H .......
maxH*
*maxH: The maximum internal X-address value in each access mode
*3 Depending on the setting of AIM, address Y automatically changes.
Transition of AY Register
00H 01H ....... 0FH
Transition of Y Address
Same as AY register
*4 Depending on the setting of AIM, addresses X and Y also change. When the X
address exceeds maxH, Y address is incremented.
Transition of X and Y Address
Transition of AX and AY Register
AX:
maxH*
00H
00H
Same as AX and AY register
AY:
When each AX exceed maxH*, increment AY
00H 00H 9FH
*maxH: The maximum internal X-address value in each access mode
Product Specification (V0.4) 08.15.2005
• 49
(This specification is subject to change without further notice)