EDD51323DBH-LS
Burst Stop
Burst Stop Command during Burst Operation
The burst stop (BST) command stops the burst read and sets all output buffers to high-Z. tBSTZ (= CL) cycles after
a BST command issued, all DQ and DQS pins become high-Z.
The BST command is also supported for the burst write operation. No data will be written in subsequent cycles.
Note that bank address is not referred when this command is executed.
t0
t0.5
t1
t1.5
t2
t2.5
t3
t3.5
t4
t4.5
t5
t5.5
CK
/CK
READ
Command
BST
NOP
tBSTZ
DQS
DQ
out0 out1
CL: /CAS latency
Burst Stop during a Read Operation
Preliminary Data Sheet E1432E20 (Ver. 2.0)
29