EBJ21RE8BAFA
SDA (input and output pins)
Data input/output for serial PD.
SA (input pin)
Serial address input.
/RESET (input pin)
/RESET is negative active signal (active low) and is referred to GND.
Par_In (input pin)
Parity bit for the Address and Control bus.
/Err_Out (output pin)
Parity error found on the Address and Control bus.
/Event (output pin)
Temperature alert output.
Detailed Operation Part, Electrical Characteristics and Timing Waveforms
Refer to the EDJ1104BASE, EDJ1108BASE, EDJ1116BASE datasheet (E1128E). DIMM /CAS latency =
component CL + 1 for registered type.
Data Sheet E1251E40 (Ver. 4.0)
17