ES51932
22,000 Counts Auto DMM
LCD Backplane Waveform
V- +3.2
V- +3.1
V-
V- +3.2
V-
V- +3.1
V-
V- +3.2
V-
V-
V- +3.1
V- +3.2
V-
V-
V- +3.1
V- +3.2
V-
V-
5.2 LCD display on condition
LCD Annunciator
Condition
V
A
Ω
F
In voltage measurement mode, and diode measurement mode.
In current measurement mode.
In resistance measurement mode, and continuity mode.
In capacitance measurement mode.
In continuity check mode.
In diode mode.
Hz
%
In frequency mode.
In duty cycle mode.
DC
In DC voltage or DC current mode.
AC
In AC voltage or AC current mode.
AUTO
MANU
HOLD
REL
When automatic full scale range selection is enabled.
In manual mode.
When HOLD function is enabled.
When Relative function is enabled.
MAX / MIN
PMAX / PMIN
m1
When Maximum or Minimum function is enabled.
When PMAX or PMIN function is enabled.
In capacitor measurement mode and the full scale range is in the order of mF.
In capacitor measurement mode and the full scale range is in the order of uF.
µ1
n
m2
In capacitor measurement mode and the full scale range is in the order of nF.
In voltage or current measurement mode and the full scale range is in the order of 10-3.
In current measurement mode and the full scale range id in the order of uA.
µ2
M
K
℃
In resistance measurement mode and the full scale range is in the order of MΩ
In resistance measurement mode and the full scale range is in the order of KΩ
In temperature measurement mode and when the unit is ℃
In temperature measurement mode and when the unit is ℉
When auto power off function is enabled.
℉
APO
Full/10k/1kHz Low pass filter is active with 3dB = full bandwidth/10kHz/1kHz
ADP0-ADP4
RS232
When ADP mode is active, the ADP0-ADP4 segment will be active respectively.
When RS232 output is enabled.
Ver. 1.2
27
10/05/27