ES51925
3000 Counts Smart DMM
LCD Backplane Waveform
V- +3.2
V-
V- +3.2
V-
V- +3.2
V-
V- +3.2
V-
V- +3.2
V-
4.2 LCD display on condition
LCD annunciates
Condition
V
A
Ω
F
In voltage measurement mode, and diode measurement mode.
In current measurement mode.
In resistance measurement mode, and continuity mode.
In capacitance measurement mode.
In continuity check mode.
In diode mode.
Hz
DC
In VAHZ frequency mode.
In DC voltage or DC current mode.
AC
In AC voltage or AC current mode.
SCAN
AUTO
MANU
When auto scan mode is selected
When automatic full scale range selection is enabled.
In manual mode.
When the reading is exceeding 30V in DCV or ACV, the DNAGER symbol will be
displayed on
When HOLD function is enabled. When delay-hold is selected, the HOLD symbol
will be blinking for 6 seconds.
In capacitor measurement mode and the full scale range is in the order of mF.
In capacitor measurement mode and the full scale range is in the order of uF.
HOLD
m1
µ1
n
m2
In capacitor measurement mode and the full scale range is in the order of nF.
In voltage or current measurement mode and the full scale range is in the order of 10-3.
In current measurement mode and the full scale range id in the order of uA.
µ2
M
K
In resistance measurement mode and the full scale range is in the order of MΩ
In resistance measurement mode and the full scale range is in the order of KΩ
When auto power off function is enabled.
APO
Ver 2.9
18
10/06/25
CYRUSTEK [ Cyrustek corporation ]
