BCM89359 Advance Data Sheet
IEEE 802.11ac PHY
IEEE 802.11ac PHY
The BCM89359 WLAN Digital PHY PHY is designed to comply with IEEE 802.11ac and IEEE 802.11a/b/g/n
specifications to provide wireless LAN connectivity supporting data rates from 1 Mbps to 866.7 Mbps for low-
power, high-performance handheld applications.
The PHY has been designed to work in the presence of interference, radio nonlinearity, and various other
impairments. It incorporates optimized implementations of the filters, FFT, and Viterbi decoder algorithms.
Efficient algorithms have been designed to achieve maximum throughput and reliability, including algorithms for
carrier sense/rejection, frequency/phase/timing acquisition and tracking, channel estimation and tracking. The
PHY receiver also contains a robust IEEE 802.11b demodulator. The PHY carrier sense has been tuned to
provide high throughput for IEEE 802.11g/11b hybrid networks with Bluetooth coexistence. It has also been
designed for sharing an antenna between WL and BT to support simultaneous Rx-Rx.
The key PHY features include:
•
Programmable data rates from MCS0–MCS9 in 20 MHz, 40 MHz, and 80 MHz channels, as specified in
IEEE 802.11ac
•
•
•
•
•
•
Real simultaneous dual-band (RSDB), 2×2, and 80 + 80 MHz modes
Improved performance with 2×2 channel smoothing and spur canceller support
Supports optional Short GI and Green Field modes in Tx and Rx
Tx and Rx LDPC for improved range and power efficiency
Beamforming support
All scrambling, encoding, forward error correction, and modulation in the transmit direction and inverse
operations in the receive direction
•
•
•
•
•
•
•
•
•
Supports IEEE 802.11h/k for worldwide operation
Advanced algorithms for low power, enhanced sensitivity, range, and reliability
Algorithms to improve performance in presence of Bluetooth
Closed loop-transmit power control
Digital RF chip calibration algorithms to handle CMOS RF chip non-idealities
On-the-fly channel frequency and transmit power selection
Available per-packet channel quality and signal strength measurements
Designed to meet FCC and other worldwide regulatory requirements
5 MHz and 10 MHz modes of operation
Broadcom®
September 9, 2014 • 89359-DS100-R
Page 68
BROADCOM CONFIDENTIAL