欢迎访问ic37.com |
会员登录 免费注册
发布采购

BCM4354XKUBGT 参数 Datasheet PDF下载

BCM4354XKUBGT图片预览
型号: BCM4354XKUBGT
PDF下载: 下载PDF文件 查看货源
内容描述: [Single-Chip 5G Wi-Fi IEEE 802.11ac 2×2 MAC/ Baseband/Radio with Integrated Bluetooth 4.1 and FM Receiver]
分类和应用:
文件页数/大小: 192 页 / 4575 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号BCM4354XKUBGT的Datasheet PDF文件第53页浏览型号BCM4354XKUBGT的Datasheet PDF文件第54页浏览型号BCM4354XKUBGT的Datasheet PDF文件第55页浏览型号BCM4354XKUBGT的Datasheet PDF文件第56页浏览型号BCM4354XKUBGT的Datasheet PDF文件第58页浏览型号BCM4354XKUBGT的Datasheet PDF文件第59页浏览型号BCM4354XKUBGT的Datasheet PDF文件第60页浏览型号BCM4354XKUBGT的Datasheet PDF文件第61页  
BCM4354 Data Sheet  
UART Interface  
UART Interface  
The BCM4354 shares a single UART for Bluetooth and FM. The UART is a standard 4-wire interface (RX, TX,  
RTS, and CTS) with adjustable baud rates from 9600 bps to 4.1 Mbps. The interface features an automatic baud  
rate detection capability that returns a baud rate selection. Alternatively, the baud rate may be selected through  
a vendor-specific UART HCI command.  
UART has a 1040-byte receive FIFO and a 1040-byte transmit FIFO to support EDR. Access to the FIFOs is  
conducted through the AHB interface through either DMA or the CPU. The UART supports the Bluetooth 4.1  
UART HCI specification: H4, a custom Extended H4, and H5. The default baud rate is 115.2 Kbaud.  
The UART supports the 3-wire H5 UART transport, as described in the Bluetooth specification (“Three-wire  
UART Transport Layer”). Compared to H4, the H5 UART transport reduces the number of signal lines required  
by eliminating the CTS and RTS signals.  
The BCM4354 UART can perform XON/XOFF flow control and includes hardware support for the Serial Line  
Input Protocol (SLIP). It can also perform wake-on activity. For example, activity on the RX or CTS inputs can  
wake the chip from a sleep state.  
Normally, the UART baud rate is set by a configuration record downloaded after device reset, or by automatic  
baud rate detection, and the host does not need to adjust the baud rate. Support for changing the baud rate  
during normal HCI UART operation is included through a vendor-specific command that allows the host to adjust  
the contents of the baud rate registers. The BCM4354 UARTs operate correctly with the host UART as long as  
the combined baud rate error of the two devices is within ±2%.  
Table 14: Example of Common Baud Rates  
Desired Rate  
Actual Rate  
Error (%)  
4000000  
3692000  
3000000  
2000000  
1500000  
1444444  
921600  
460800  
230400  
115200  
57600  
4000000  
3692308  
3000000  
2000000  
1500000  
1454544  
923077  
461538  
230796  
115385  
57692  
0.00  
0.01  
0.00  
0.00  
0.00  
0.70  
0.16  
0.16  
0.17  
0.16  
0.16  
0.00  
0.16  
0.00  
0.16  
0.00  
38400  
38400  
28800  
28846  
19200  
19200  
14400  
14423  
9600  
9600  
Broadcom®  
October 15, 2014 • 4354-DS109-R  
Page 56  
BROADCOM CONFIDENTIAL  
 复制成功!