PRELIMINARY
CYW43438
15. DC Characteristics
Note: Values in this data sheet are design goals and are subject to change based on the results of device characterization.
15.1 Absolute Maximum Ratings
Caution! The absolute maximum ratings in Table 21 indicate levels where permanent damage to the device can occur, even if these
limits are exceeded for only a brief duration. Functional operation is not guaranteed under these conditions. Excluding VBAT,
operation at the absolute maximum conditions for extended periods can adversely affect long-term reliability of the device.
Table 21. Absolute Maximum Ratings
Rating
DC supply for VBAT and PA driver supply
DC supply voltage for digital I/O
Symbol
Value
–0.5 to +6.01
Unit
VBAT
V
V
V
V
V
V
V
V
VDDIO
–0.5 to 3.9
–0.5 to 3.9
–0.5 to 1.575
–0.5 to 1.32
–0.5 to 1.32
–0.5
DC supply voltage for RF switch I/Os
DC input supply voltage for CLDO and LNLDO
DC supply voltage for RF analog
DC supply voltage for core
Maximum undershoot voltage for I/O2
Maximum overshoot voltage for I/O2
Maximum junction temperature
VDDIO_RF
–
VDDRF
VDDC
Vundershoot
Vovershoot
Tj
VDDIO + 0.5
125
°C
1. Continuous operation at 6.0V is supported.
2. Duration not to exceed 25% of the duty cycle.
15.2 Environmental Ratings
The environmental ratings are shown in Table 22.
Table 22. Environmental Ratings
Characteristic
Ambient temperature (TA)
Storage temperature
Value
–30 to +70°C 1
–40 to +125°C
Less than 60
Less than 85
Units
Conditions/Comments
C
C
%
Operation
–
Storage
Operation
Relative humidity
%
1. Functionality is guaranteed, but specifications require derating at extreme temperatures (see the specification tables for details).
15.3 Electrostatic Discharge Specifications
Extreme caution must be exercised to prevent electrostatic discharge (ESD) damage. Proper use of wrist and heel grounding straps
to discharge static electricity is required when handling these devices. Always store unused material in its antistatic packaging.
Table 23. ESD Specifications
Pin Type
Symbol
Condition
ESD Rating
1000
Unit
ESD, Handling Reference:
NQY00083, Section 3.4,
Group D9, Table B
Human Body Model Contact Discharge per
JEDEC EID/JESD22-A114
ESD_HAND_HBM
V
Machine Model (MM)
ESD_HAND_MM
ESD_HAND_CDM
Machine Model Contact
30
V
V
Charged Device Model Contact Discharge per
JEDEC EIA/JESD22-C101
CDM
300
Document Number: 002-14796 Rev. *K
Page 65 of 101