XLAMP MP-L EASYWHITE LEDS
sꢈꢋꢀꢂꢏꢁ cꢋꢊꢌꢇꢈꢇꢋꢊꢄ
XLamp MP-L easyWhitꢀ LeDs that haꢁꢀ bꢀꢀn rꢀmoꢁꢀd from thꢀ original MBB packaging but not soldꢀrꢀd should bꢀ
stored in one of the following ways:
•
•
•
Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30°C, and
placꢀ frꢀsh dꢀsiccant and an RH indicator in thꢀ containꢀr to ꢁꢀrify that thꢀ RH is no grꢀatꢀr than 60%.
Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and
thꢀ RH at no grꢀatꢀr than 60%.
For short-term store only: LEDs can be resealed in the original MBB bag soon after opening. Fresh desiccant may be
needed. Use the included humidity indicator card to verify <60% RH.
If an environment of <60% RH is not available for storage, XLamp MP-L EasyWhite LEDs should be baked (described
above) before reflow soldering.
rꢋhs cꢋꢃpꢉꢇꢂꢊꢎꢁ
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wisꢀ rꢀstrictꢀd matꢀrials in this product arꢀ bꢀlow thꢀ maximum concꢀntration ꢁaluꢀs (also rꢀfꢀrrꢀd to as thꢀ thrꢀshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amꢀndꢀd through April 21, 2006.
vꢇꢄꢇꢋꢊ aꢌꢐꢇꢄꢋꢀꢅ cꢉꢂꢇꢃ
WARNING. Do not look at ꢀxposꢀd lamp in opꢀration. eyꢀ injury can rꢀsult. For morꢀ information about LeDs and ꢀyꢀ
safꢀty, plꢀasꢀ rꢀfꢀr to thꢀ Crꢀꢀ LeD eyꢀ Safꢀty application notꢀ.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
of Cree, Inc.
of Cree, Inc.
11
CREE [ CREE, INC ]
