Crane Aerospace & Electronics Power Solutions
MTR Single, Dual and Triple DC/DC Converter Cases
28 VOLT INPUT – 30 WATT
BOTTOM VIEW CASE K5
Flanged cases: Designator “F” required in Case Option position of model number.
Squared corner and dot on top
of case indicate pin one.
Solder Seal
1.115 max. (28.32)
0.955 (24.26)
1
2
3
4
5
0.040 dia
(1.02)
0.162 dia
(4.11)
MTR Series Dual
(Standard and ES)
0.555 (14.1)
Solder Tip-off
10
9
8
7
6
0.155 (3.94)
0.000
Flange thickness: 0.060 (1.52)
2.910 max
(73.91)
Seal hole: 0.091 0.001 (2.31 0.03)
Case dimensions in inches (mm)
Tolerance 0.005 (0.13) for three decimal places
0.01 (0.3) for tꢀo decimal places
unless otherꢀise specified
CAUTION
Heat from refloꢀ or ꢀave soldering may damage the device.
Solder pins individually ꢀith heat application not exceeding 300°C for 10 seconds per pin.
Materials
Header Cold Rolled Steel/Nickel/Tin
Cover Cold Rolled Steel/Nickel/Tin
Pins
#52 alloy compression glass seal
Case K3, Rev C, 20060109
Please refer to the numerical dimensions for accuracy. All information is believed to be accurate,
but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make
changes in products or specifications ꢀithout notice.
Copyright © 1999-2006 Interpoint Corp. All rights reserved.
FIGURE 37: CASE K5 – SINGLE MODELS
www.craneae.com
Page 17 of 19
Rev G - 20060505