Crane Aerospace & Electronics Power Solutions
MTR Single, Dual and Triple DC/DC Converter Cases
28 VOLT INPUT – 30 WATT
BOTTOM VIEW CASE K3
Flanged cases: Designator “F” required in Case Option position of model number.
Platform
Seam Seal
Dot on top of case indicates pin one
1.110 max. (28.19)
0.955 (24.26)
1
2
3
8
4
7
5
0.162 dia
(4.11)
0.040 dia
(1.02)
0.555 (14.1)
10
9
6
0.155 (3.94)
0.000
Platform
Seam Seal
Dot on top of case indicates pin one
1.110 max. (28.19)
0.955 (24.26)
0.162 dia
(4.11)
1
2
3
8
4
7
5
0.040 dia
(1.02)
0.555 (14.1)
10
9
6
0.155 (3.94)
0.000
Flange thickness: 0.060 (1.52)
Seal hole: 0.120 0.002 (3.05 0.05)
2.910 max
(73.91)
Materials
Case dimensions in inches (mm)
Header Cold Rolled Steel/Nickel/Gold
Tolerance 0.005 (0.13) for three decimal places
Cover Kovar/Nickel
0.01 (0.3) for tꢀo decimal places
Pins
#52 alloy/Gold ceramic seal
unless otherꢀise specified
CAUTION
Heat from refloꢀ or ꢀave soldering may damage the device.
Solder pins individually ꢀith heat application not exceeding
300°C for 10 seconds per pin.
Case K3, Rev C, 20060110
Please refer to the numerical dimensions for accuracy.
All information is believed to be accurate, but no responsibility is assumed for errors or omissions.
Interpoint reserves the right to make changes in products or specifications ꢀithout notice.
Copyright © 1999-2006 Interpoint Corp. All rights reserved.
FIGURE 36: CASE K3 – SINGLE MODELS
www.craneae.com
Page 16 of 19
Rev G - 20060505