CX82100 Home Network Processor Data Sheet
2.2.2
Operating Conditions, Absolute Maximum Ratings, and Power Consumption
CX82100 HNP operating conditions are specified in Table 2-6.
CX82100 HNP absolute maximum ratings are stated in Table 2-7.
CX82100 HNP power consumption is listed in Table 2-8.
Table 2-6. CX82100 HNP Operating Conditions
Parameter
Core circuits supply voltage
I/O circuits supply voltage
I/O clamp voltage
Symbol
VDD
VDDO
VGG*
Min
1.65
3.0
Typ
1.8
3.3
Max
1.95
3.6
Units
VDC
VDC
VDC
°C
Operating ambient temperature
T
0
70
A
*Connect VGG to the highest signaling level being used to drive input signals, i.e. +3.3 V or +5 V.
Table 2-7. CX82100 HNP Absolute Maximum Ratings
Parameter
Core circuits supply voltage
I/O circuits supply voltage
Input voltage
Symbol
VDD
VDDO
Min
Max
2.0
3.7
Units
VDC
VDC
VDC
-0.35
-0.35
-0.35
V
VGG + 0.35*
IN
Voltage applied to outputs in high
impedance (Off) state
Storage temperature
V
-0.35
VGG + 0.35*
VDC
HZ
T
-55
125
°C
S
* VGG = +3.3 V ± 0.3 V or +5 V ± 0.25 V.
Caution: Handling CMOS Devices
These devices contain circuitry to protect the inputs against damage due to high static
voltages. However, normal precautions should be taken to avoid application of any
voltage higher than maximum rated voltage.
An unterminated input can acquire unpredictable voltages through coupling with stray
capacitance and internal crosstalk. Both power dissipation and device noise immunity
degrades. Therefore, all inputs should be connected to an appropriate supply voltage.
Input signals should never exceed the voltage range from 0.5V or more negative than
GND to 0.5V or more positive than VDD. This prevents forward biasing the input
protection diodes and possibly entering a latch up mode due to high current transients.
Table 2-8. CX82100 HNP Power Consumption
Typical
Maximum
Typical
Maximum
Supply Voltage
Current (mA)
Current (mA)
Power (mW)
Power (mW)
VDD
VDDO
85
15
105
25
155
45
205
90
Test conditions:
VDD = +1.8 VDC for typical values;
VDD = +1.95 VDC for maximum values.
VDDO = +3.3 VDC for typical values;
VDDO = +3.6 VDC for maximum values.
2-18
Conexant Proprietary and Confidential Information
101306C