AccessRunner ADSL-USB Modem Device Set Data Sheet
P5200 UIC Electrical and Environmental Specifications
P5200 UIC DC electrical characteristics are listed Table 3-3.
P5200 UIC operating conditions are specified in Table 3-4.
P5200 UIC absolute maximum ratings are stated in Table 3-5.
P5200 UIC power consumption is listed in Table 3-6.
Table 3-3. P5200 UIC DC Electrical Characteristics
Parameter
Input high voltage
Input low voltage
Input leakage current
Symbol
Min.
Typ.
Max.
Units
Test Conditions
(see Note 1)
VIH
VIL
IIL/IIH
2.0
-0.5
-10
VGG + 0.5
VDC
VDC
µA
0.8
10
VIN = 0 for Min.
VIN = VIN (MAX) for Max.
Input leakage current (with internal
pull-downs) (See Note 2)
Input leakage current (with internal
pull-ups) (See Note 2)
IIL/IIH
IIL/IIH
-10
100
10
VIN = 0 for Min.
µA
µA
VIN = VIN (MAX) for Max.
-100
VIN = 0 for Min.
VIN = VIN (MAX) for Max.
Internal pullup/pulldown resistance
Output high voltage
Output low voltage
Rpu/Rpd
VOH
VOL
50
200
VDDO
0.4
kΩ
VDC
VDC
pF
2.4
IOH = 4 mA
IOL = 4 mA
Input/output capacitance
CINOUT
3
NOTES:
1. Test Conditions (unless otherwise stated):
VDDcore = +1.8 ± 0.15 VDC
VDDO = +3.3 ± 0.3 VDC;
V
= +3.6V for VGG connected to +3.3V;
IN (MAX)
IN (MAX)
V
= +5.25V for VGG connected to +5V.
2. Current flow out of the device is shown as minus.
3. Stresses above those listed may cause permanent device failure. Functionality at or above these limits is not implied. Exposure to
absolute maximum ratings for extended periods of time may affect device reliability.
3-8
Conexant
100427B
CONEXANT [ CONEXANT SYSTEMS, INC ]
