欢迎访问ic37.com |
会员登录 免费注册
发布采购

BT8375EPF 参数 Datasheet PDF下载

BT8375EPF图片预览
型号: BT8375EPF
PDF下载: 下载PDF文件 查看货源
内容描述: 单芯片收发器T1 / E1和综合业务数字网( ISDN )基本速率接口 [single chip transceivers for T1/E1 and Integrated Service Digital Network (ISDN) primary rate interfaces]
分类和应用: 电信集成电路综合业务数字网
文件页数/大小: 323 页 / 1950 K
品牌: CONEXANT [ CONEXANT SYSTEMS, INC ]
 浏览型号BT8375EPF的Datasheet PDF文件第202页浏览型号BT8375EPF的Datasheet PDF文件第203页浏览型号BT8375EPF的Datasheet PDF文件第204页浏览型号BT8375EPF的Datasheet PDF文件第205页浏览型号BT8375EPF的Datasheet PDF文件第207页浏览型号BT8375EPF的Datasheet PDF文件第208页浏览型号BT8375EPF的Datasheet PDF文件第209页浏览型号BT8375EPF的Datasheet PDF文件第210页  
Bt8370/8375/8376  
3.15 Bit-Oriented Protocol Registers  
Fully Integrated T1/E1 Framer and Line Interface  
RBOP_INTEG  
RBOP IntegrationRequires receipt of two identical, consecutive 16-bit patterns (without  
errors or gaps between patterns) to validate a single codeword. In this case, an errored  
codeword does not increment the pattern count. RBOP integration must be enabled to meet  
codeword detection criteria while receiving a 1E-3 bit error ratio. RBOP_INTEG adds at least  
one to the number of successive 16-bit patterns needed to qualify receipt of BOP message (2 in  
a row counts as 1 pattern; 11 in a row counts as 10; and 26 in a row counts as 25).  
0 = no integration  
1 = RBOP integrationRBOP_LEN[1:0]  
RBOP Message LengthSelects the number of successive identical 16-bit patterns needed  
to qualify receipt of a single BOP message and update RBOP [addr 0A2] with the received  
codeword. During this time, the RBOP interrupt [ISR1; addr 00A] is also activated. Successive  
patterns can be separated by any number of bits, as long as they do not contain a different valid  
codeword.  
RBOP_LEN  
Successive Patterns  
Notes  
00  
01  
10  
11  
1
10  
Single 16-bit pattern updates RBOP  
Minimum command, response length  
Preferred command, response length  
25  
Change  
RBOP updates on receipt of each new  
pattern  
TBOP_LEN[1:0]  
TBOP Message LengthSelects the number of repeated 16-bit patterns sent as a single  
message when a TBOP [addr 0A1] codeword is written. Another message with the same or  
different codeword value can be written to TBOP as soon as prior message start is  
acknowledged, via activation of a TBOP interrupt [ISR2; addr 009]. If no new message is  
written, the FDL channel returns to TDL1 output control upon completion of message  
transmission. The processor changes TBOP_LEN to end transmission of a continuously  
repeating message.  
TBOP_LEN  
Repeated  
Patterns  
Message  
Length (ms)  
Notes  
00  
01  
10  
11  
1
10  
4
40  
Single message sends 16 FDL bits  
Minimum command, response length  
Preferred command  
25  
100  
Continuous  
Continuous  
Required for ESF Yellow Alarm  
3-88  
Conexant  
N8370DSE