Mini Power Connector
Technical Data
Working voltage
Mini Power 24 positions
Contacts 22, 23 and 24
Contacts 1 to 6
1000 V r.m.s.
500 V r.m.s.
333 V r.m.s.
Contacts 7 to 21
Mini Power 26 positions
Contacts 1 to 6 and 22 to 26
Contacts 7 to 21
500 V r.m.s.
333 V r.m.s.
Mechanical Characteristics
Blind mating system
Male and female connector bodies provide “lead-in”
for 1.3 mm diametral misalignment
Polarization
Provided by connector body design
Resistance to solder heat
260°C for 10 seconds duration per IEC 512-6, Test 12e,
25-watt soldering iron
for other application contact factory
Sequential contact mating system
Mini Power 24 positions
Mini Power 26 positions
First mate contact 22 and last mate contact position 7
Last mate contact position 7
Safety requirements
Following size 16 contacts are recessed 5 mm below the face
of the female insulator for safety requirements
Mini Power 24 positions
Contact positions 23 and 24
Compliant terminations press fit
Size 16 and 22 contacts are available with
compliant contact terminations
Printed board and panel mounting
Mechanical operations
Mounting holes provided in connector body
for both printed board and panel mouting
self-tapping screws are available
250 cycles
Working temperature
-55°C to +125°C
Technical alterations are subjects to change without notice.
|
3 5