CompactPCI Connectors
Technical Data
Working voltage
CompactPCI 38 positions
Contacts 36, 37 and 38
Contacts 1 to 20
1000 V r.m.s.
500 V r.m.s.
333 V r.m.s.
Contacts 21 to 35
CompactPCI 47 positions
Contacts 45, 46 and 47
Contacts 1 to 20
1000 V r.m.s.
500 V r.m.s.
333 V r.m.s.
Contacts 21 to 44
Mechanical Characteristics
Blind mating system
Male and female connector bodies provide “lead-in”
for 1.3 mm diametral misalignment
Polarization
Provided by connector body design
Crimp contacts
Install contact from termination side; release from mating side
67 N
Removable contact retention in connector body
Size 16 contacts
Fixed contact retention in connector body
Size 16 contacts
Size 20 and 22 contacts
45 N
27 N
Resistance to solder heat
260°C for 10 seconds duration per IEC 512-6, Test 12e,
25-watt soldering iron
for other application contact factory
Sequential contact mating system
CompactPCI 38 positions
CompactPCI 47 positions
First mate contact 36 and last mate contact positions 22, 25, and 28
First mate contact 45 and last mate contact position 27
Safety requirements
Following size 16 contacts are recessed 5 mm below the face
of the female insulator for safety requirements
Contact positions 37 and 38
CompactPCI 38 positions
CompactPCI 47 positions
Contact positions 46 and 47
Compliant terminations press fit
Printed board and panel mounting
Size 16, 20 and 22 contacts are available with compliant press fit
compliant contact terminations
Mounting holes provided in connector body
for both printed board and panel mouting
self-tapping screws are available
Mechanical operations
250 cycles
Working temperature
-55°C to +125°C
Technical alterations are subjects to change without notice.
|
3 3
CONEC [ CONEC ELEKTRONISCHE BAUELEMENTE GMBH ]
