CM1481 - Configuration Menu
The table below indicates the functions of the CM1481 and the options that may be achieved via software
configuration. Details in BOLD TYPE indicate DEFAULT settings.
CM1481 CONFIGURATION PROGRAM
Function
Default
0 1 2 3 4
6 7 8 9 0
2 1 0 1 8
6 5 4 3 2
ZVEI1
70ms
100ms
200ms
OFF
Options
Transmit Address:
Receive Address:
Transpond Address:
ANI Address:
5 OR (6)
VALID ADDRESS TONES
Toneset:
CCIR EEA ZVEI1 ZVEI2 ZVEI3 PZVEI
30 to 150ms in 10ms steps
20 to 300ms in 20ms steps
OFF, 0 to 2550ms in 10ms steps
OFF, 0 to 2550ms in 10ms steps
1 2 3 4 5 6 7 8 9 A B C D E F
0 to 15 in steps of 1
OFF, 10 to 248secs in 1sec steps
1 to 255 in steps of 1
OFF, 1 to 255secs in 1sec steps
Yes or No
Tone Length:
NOTONE Timer:
Lead-In Delay:
Lead-In Tone Length:
Lead-In Tone Digit:
Number of Called Alerts:
PTT Time-Out:
0
15
OFF
Pseudo Iterations:
Timed Mute Reset:
Extended Data Tone (Tx):
Call When Quiet:
Radio “Stunned”:
Operation:
32
OFF
No
No
Yes or No
No
Yes or No
Single
Quiet
OFF
Single or Dual -Button
Quiet or Open
Start-Up State:
ANI Mode:
OFF, Lead, Trail or Lead & Trail (both)
OFF, Address or Beep
5 or 6
Transpond Mode:
Tones per Address:
Lead-In Gap:
OFF
5
No
Yes or No
Over-Air Functions:
Extended Group Tone (Tx):
Open Mode:
Disabled
No
Disabled or Enabled
Yes or No
Unmute
OFF
Unmute or Transparent
On or OFF
LED Call Memory:
Beep Mute State:
Unmute
Mute
PTT In:
PTT Out:
Busy:
Active- LOW
Active- LOW
HIGH or LOW
HIGH or LOW
Active- LOW
Active- HIGH
Active- HIGH
Active- LOW
Active- LOW
HIGH or LOW
Mute:
LOW or LOW
LED:
LOW or LOW
Quiet/Open:
Call:
HIGH or LOW
HIGH or LOW
Table 4 Configuration Options
Further information on CM1481 functions is given in the Functional Descriptions section of this
manual.
CM1481ConfigurationSoftware,Modulefirmwareanddocumentationprovidedaresupplied‘asis’. UnderthisconditionCMLmakes
nowarranty,expressorimplied,ofthesaleabilityofthismediaoritsfitnessforaparticularpurpose.Undernocircumstanceswhatsoever
will CML be liable for ANY damage, loss of profits, or any consequential loss arising from the use of this media, even if CMLhas been
advised of the possibility of such loss. CML does not assume any responsibility for the use of any of the circuitry described.No circuit
patent licences are implied and CML reserves the right at any time without notice to change the said circuitry.
10
CMLMICRO [ CML MICROCIRCUITS ]
