欢迎访问ic37.com |
会员登录 免费注册
发布采购

CS4297A-JQEP 参数 Datasheet PDF下载

CS4297A-JQEP图片预览
型号: CS4297A-JQEP
PDF下载: 下载PDF文件 查看货源
内容描述: [Consumer Circuit, PQFP48, 9 X 9 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, MS-022, TQFP-48]
分类和应用: 解码器编解码器
文件页数/大小: 46 页 / 897 K
品牌: CIRRUS [ CIRRUS LOGIC ]
 浏览型号CS4297A-JQEP的Datasheet PDF文件第38页浏览型号CS4297A-JQEP的Datasheet PDF文件第39页浏览型号CS4297A-JQEP的Datasheet PDF文件第40页浏览型号CS4297A-JQEP的Datasheet PDF文件第41页浏览型号CS4297A-JQEP的Datasheet PDF文件第43页浏览型号CS4297A-JQEP的Datasheet PDF文件第44页浏览型号CS4297A-JQEP的Datasheet PDF文件第45页浏览型号CS4297A-JQEP的Datasheet PDF文件第46页  
CS4297  
CrystalClear™ SoundFusion™ Audio Codec ’97  
LINE_OUT_L and LINE_OUT_R - Analog Line Level Outputs  
These signals are analog outputs from the stereo output mixer. The full scale output voltage for  
output is nominally 1 V and is internally biased at the Vrefout voltage reference. It is  
RMS  
required to either AC couple these pins to external circuitry or DC couple them to a buffer op-  
amp biased at the Vrefout voltage. These pins need a 680 pF NPO capacitor attached to analog  
ground.  
ALT_LINE_OUT_L and ALT_LINE_OUT_R - Analog Alternate Line Level Outputs  
These signals are analog outputs from the stereo output mixer. The full scale output voltage for  
each output is nominally 1 V  
and is internally biased at the Vrefout voltage reference. It is  
RMS  
required to either AC couple these pins to external circuitry or DC couple them to a buffer op-  
amp biased at the Vrefout voltage. These pins need a 680 pF NPO capacitor attached to analog  
ground.  
MONO_OUT, Analog Mono Line Level Output  
This signal is an analog output from the Mono output mixer. This is a left and right channel  
mix of the output of the stereo input mixer. The full scale output is nominally 1 V  
and is  
RMS  
internally biased at the Vrefout voltage reference. AC coupling to external circuitry is required.  
This pin needs a 680 pF NPO capacitor attached to analog ground.  
Filter and Reference Pins  
REFFLT - Internal Reference Voltage, Input  
This is the voltage reference used internal to the part. A 0.1 µF and a 1 µF (must not be larger  
than 1 µF) capacitor with short, wide traces must be connected to this pin. No other  
connections should be made to this pin.  
Vrefout - Voltage Reference, Output  
All analog inputs and outputs are centered around Vrefout which is nominally 2.2 Volts. This  
pin may be used to level shift external circuitry, however any external loading should be  
buffered.  
AFLT1 - Left Channel Antialiasing Filter Input  
This pin needs a 390 pF NPO capacitor attached to analog ground.  
AFLT2 - Right Channel Antialiasing Filter Input  
This pin needs a 390 pF NPO capacitor attached to analog ground.  
42  
DS242F5  
 复制成功!