CS42406
4. APPLICATIONS
4.1
Single, Double, and Quad-Speed Modes
ADC Serial Port
4.1.1
The ADC’s internal to the CS42406 can support output sample rates from 2 kHz to 200 kHz, and a base
MCLK/ADC_LRCK ratio of either 256x or 384x. The proper speed mode can be determined by the desired
output sample rate and the external MCLK/ADC_LRCK ratio, as shown in Table 1 and Table 2. Please
see section 4.2 for a discussion on how to select the desired speed mode.
MCLK /
ADC_SCLK /
Speed Mode
ADC_LRCK Ratio ADC_LRCK Ratio
Output Sample Rate Range (kHz)
Single-Speed Mode
512x
256x
256x
128x
128x
64x*
32x, 48x, 64x
32x, 48x, 64x
32x, 48x, 64x
32x, 48x, 64x
32x, 48x, 64x
64x
43 - 50
2 - 50
Double-Speed Mode
Quad-Speed Mode
86 - 100
50 - 100
172 - 200
100 - 200
* Quad-Speed Mode, 64x only available in Master Mode.
Table 1. ADC Speed Modes and the Associated Output Sample Rates (Fs) for 256x Mode
MCLK/ADC_LRCK ADC_SCLK/ADC_
Speed Mode
Ratio
768x
384x
384x
192x
192x
96x*
LRCK Ratio
32x, 48x, 64x
32x, 48x, 64x
32x, 48x
Output Sample Rate Range (kHz)
Single-Speed Mode
43 - 50
2 - 50
Double-Speed Mode
Quad-Speed Mode
86 - 100
50 - 100
172 - 200
100 - 200
32x, 48x
32x, 48x
48x
* Quad Speed Mode, 96x only available in Master Mode.
Table 2. ADC Speed Modes and the Associated Output Sample Rates (Fs) for 384x Mode
4.1.2
DAC Serial Port
4.1.2a
Stand Alone Mode
The DAC’s internal to the CS42406 operate in one of four operational modes determined by the DAC_Mx
pins when in Stand Alone Mode. Sample rates outside the specified range for each mode are not support-
ed. Refer to Table 3.
30
DS614PP5
CIRRUS [ CIRRUS LOGIC ]
