CS2000-CP
5.3.6
Ratio Configuration Summary
The R is the user defined ratio for which up to four different values (Ratio ) can be stored in the reg-
UD
0-3
ister space. The RSel[1:0] or LockClk[1:0] bits then select the user defined ratio to be used (depending
on if static or dynamic ratio mode is to be used). The resolution for the R is selectable, for the dynamic
UD
ratio mode, by setting LFRatioCfg. R-Mod is applied if selected. The user defined ratio, and ratio modifier
make up the effective ratio R
, the final calculation used to determine the output to input clock ratio. The
EFF
effective ratio is then corrected for the internal dividers. The frequency synthesizer’s fractional-N source
selection is made between the static ratio (in frequency synthesizer mode) or the dynamic ratio generated
from the digital PLL (in Hybrid PLL mode) by either the FracNSrc bit for manual mode or the presence of
CLK_IN in automatic mode. The conceptual diagram in Figure 18 summarizes the features involved in the
calculation of the ratio values used to generate the fractional-N value which controls the Frequency Syn-
thesizer.
Timing Reference Clock
(XTI/REF_CLK)
CLK_IN sense
(auto selection)
RSel[1:0]
LockClk[1:0]
≠
Divide
RefClkDiv[1:0]
FracNSrc
(manual selection)
Effective Ratio REFF
RSel[1:0]
RSel[1:0] = LockClk[1:0]
User Defined Ratio RUD
Frequency
Synthesizer
PLL Output
RModSel[2:0]
RefClkDiv[1:0]
Ratio 0
Ratio 1
Ratio 2
Ratio 3
SysClk
Ratio Format
Static Ratio
12.20
only
Ratio
Modifier
R Correction
N
Dynamic Ratio
12.20
20.12
Ratio
Modifier
Digital PLL &
Fractional N Logic
R Correction
LFRatioCfg
Frequency Reference Clock
(CLK_IN)
LockClk[1:0]
Figure 18. Ratio Feature Summary
Referenced Control
Register Location
Ratio .................................“Ratio 0 - 3 (Address 06h - 15h)” on page 31
0-3
RSel[1:0] ...............................“Ratio Selection (RSel[1:0])” on page 29
LockClk[1:0] ..........................“Lock Clock Ratio (LockClk[1:0])” section on page 30
LFRatioCfg............................“Low-Frequency Ratio Configuration (LFRatioCfg)” on page 32
RModSel[2:0] ........................“R-Mod Selection (RModSel[2:0])” section on page 29
RefClkDiv[1:0] .......................“Reference Clock Input Divider (RefClkDiv[1:0])” on page 32
FracNSrc...............................“Fractional-N Source for Frequency Synthesizer (FracNSrc)” section on page 30
22
DS761F1
CIRRUS [ CIRRUS LOGIC ]
