CDB5530U
2.2.3
Data Collection Window
The Data Collection window (Figure 7) allows the user to collect sample sets of data from the CS5530 and
analyze them using time domain, FFT, and histogram plots. The Data Collection window is accessible
through the Window option, or by pressing <F3>.
Figure 7. CDB5530U Data Collection Window
Time Domain / FFT / Histogram Selector: This menu selects the type of data processing to perform on
the collected data and display in the plot area. Refer to Section 2.6, "Analyzing Data" on page 14 for more
information.
Collect Button: This button will collect data from the part, to be analyzed in the plot area. See Section
2.3, "Collecting Data Sets" on page 14 for more information.
Config Button: This button will bring up the Configuration window, in which the user can modify the data
collection specifications. See Section 2.2.4, "Configuration Window" on page 13.
Output Button: This button will bring up a window in which the user can output the data to a data file for
later use, print out a plot, or print out the entire screen.
Zoom Button: This button allows the user to zoom in on the plot by selecting two points in the plot area.
Press the Restore button to return to the normal data plot, or press the Zoom button again to zoom in even
further.
Setup Select Box: This box does not apply to the CS5530 as this device doe not contain a Setup register.
12
DS742DB1
CIRRUS [ CIRRUS LOGIC ]
