TISP4xxxH4BJ Overvoltage Protector Series
MECHANICAL DATA
Tape Dimensions
SMB Package Single-Sprocket Tape
1.55 - 1.65
(.061 - .065)
3.90 - 4.10
(.154 - .161)
1.95 - 2.05
(.077 - .081)
0.40
(.016)
MAX.
1.65 - 1.85
(.065 - .073)
5.54 - 5.55
(.215 - .219)
11.70 - 12.30
(.461 - .484)
8.20
(.323)
MAX.
Cover
Tape
7.90 - 8.10
(.311 - .319)
1.50
(.059)
Ø
0 MIN.
MIN.
Carrier Tape
Embossment
4.50
(.177)
MAX.
Direction of Feed
Maximium component
rotation
20°
Typical component
cavity center line
Index
Mark
Typical component
center line
METRIC
(INCHES)
DIMENSIONS ARE:
NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in.) MIN. to 0.65 mm (.026 in.)
MAX. so that the component cannot rotate more than 20 ° within the determined cavity.
B. Taped devices are supplied on a reel of the following dimensions:-
MDXXBJ
Reel diameter:
330 ± 3.0 mm (12.99 ± .118 in.)
(2.95 in.)
Reel hub diameter 75 mm
MIN.
Reel axial hole:
13.0 ± 0.5 mm (.512 ± .020 in.)
C. 3000 devices are on a reel.
“TISP” is a trademark of Bourns, Ltd., a Bourns Company, and is Registered in U.S. Patent and Trademark Office.
“Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.
NOVEMBER 1997 - REVISED FEBRUARY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.