TISP4xxxM3BJ Overvoltage Protector Series
MECHANICAL DATA
Tape Dimensions
SMB Package Single-Sprocket Tape
1.55 -
(.061 - .065 )
3.90 - 4.10
(.154 - .161 )
1.65
1.95 - 2.05
(.077 - .081)
0.40
(.016)
1.65 -
1.85
(.065 - .073 )
MAX .
5.45 -
(.215 - .219 )
5.55
11.70 -
(.461 - .484 )
12.30
8.20
MAX .
(.323)
7.90 - 8
.10
(.311 - .319 )
Cover
Ta pe
1.5
(.059)
MIN.
0 MIN.
4.5
(.177)
Carrier Tape
Embossment
MAX .
Direction of Feed
Maximium component
rotation
20°
Ty pical component
cavity center line
Index
Mark
(if needed)
Typical component
center line
NOTES: A. The clearance between the component and the cavity must be within 0.05 mm (.002 in) MIN. to 0.65 mm (.026 in)
MDXXBJA
MAX. so that the component cannot rotate more than 20° within the determined cavity.
B. Taped devices are supplied on a reel of the following dimensions:
Reel diameter:
330 mm ± 3.0 mm (12.99 in ± .118 in)
Reel hub diameter: 75 mm (2.95 in) MIN.
Reel axial hole:
13.0 mm ± 0.5 mm (.512 in ± .020 in)
C. 3000 devices are on a reel.
“TISP” is a trademark of Bourns, Ltd., a Bourns Company, and is Registered in U.S. Patent and Trademark Office.
“Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.
NOVEMBER 1997 - REVISED FEBRUARY 2005
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.