BMA253
Data sheet
Page 75
Register 0x23 (INT_1)
Contains the threshold definition for the low-g interrupt.
Name
Bit
0x23
7
INT_1
6
5
4
Read/Write
Reset
W
0
R/W
0
R/W
1
R/W
1
Value
Content
low_th<7:4>
3
Bit
2
1
0
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
low_th<3:0>
low_th<7:0>:
low-g interrupt trigger threshold according to low_th<7:0> • 7.81 mg in a
range from 0 g to 1.992 g; the default value corresponds to an acceleration
of 375 mg
Register 0x24 (INT_2)
Contains the low-g interrupt mode selection, the low-g interrupt hysteresis setting, and the high-
g interrupt hysteresis setting.
Name
Bit
0x24
7
INT_2
6
5
4
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
1
Value
Content
high_hy<1:0>
3
reserved
Bit
2
1
0
Read/Write R/W
R/W
0
R/W
0
R/W
1
Reset
0
Value
Content
reserved
low_mode
low_hy<1:0>
high_hy<1:0>:
hysteresis of high-g interrupt according to high_hy<1:0> · 125 mg (2-g
range), high_hy<1:0> · 250 mg (4-g range), high_hy<1:0> · 500 mg (8-g
range), or high_hy<1:0> · 1000 mg (16-g range)
low_mode:
select low-g interrupt ‘0’ single-axis mode, or ‘1’ axis-summing mode
low_hy<1:0>:
hysteresis of low-g interrupt according to low_hy<1:0> · 125 mg independent
of the selected accelerometer g-range
BST-BMA253-DS000-01 | Revision 1.0 | August 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.