上海贝岭股份有限公司
Shanghai Belling Co., Ltd.
BL35P02 DATASHEET
6．Function Description
6.1 Instructions
See Section 7 for details on the instructions.
6.2 Address Spaces
$0000-$000F：Control registers
$0010-$00DF：Reserved
$00E0-$00FF：RAM
$0100-$17FF：Reserved
$1800-$1FFF：OTP ROM
6.3 Crystal Oscillator
6.3.1 High frequency Oscillator
Simplified external crystal/ceramic oscillator circuits are shown in Figure 6.3.1.1. An external crystal or
ceramic oscillation source provides 355KHz~8MHz. The load capacitor Cx which values used in the oscillator
circuit design should include all stray capacitance is necessary, but frequency is more than 3.5MHz, Cx can be
removed. The crystal and components should be mounted as close as possible to the pins for start-up
stabilization and to minimize output distortion.
O SC I
O SC O
Frequency
8MHz
Value of Cx
0/15p
4MHz
0/15p/30p
0/15p/30p
C x
C x
3.64MHz
O scillator
Figure 6.3.1.1
6.3.2 455KHz Oscillator
Using 455KHz crystal/ceramic oscillation is shown Figure 6.3.2.1，generally OSCI/OSCO must be
connected external 200pF capacitor. Otherwise OSCO can be connected 2KΩ to 5KΩ resistor that can be
used by carbon film resistor.
Figure 6.3.2.1
TEL：86-21-64850700
WEB: www.belling.com.cn
Page 5 of 27
BELLING [ BELLING ]
