PD035QU2
51
52
53
54
NC
DE
Not Use
Data Enable Input
Ground
Note 5-2
GND
GND
Ground
Note 5-1:The mode control(SEL2) not use, it can’t control CCIR601 interface, If not use CCIR601,it can
floating.
Note 5-2:For digital RGB input data format, both SYNC mode and DE+SYNC mode are supported. If DE signal
is fixed low, SYNC mode is used. Otherwise, DE+SYNC mode is used. Suggest used SYNC mode.
Note 5-3:Usually pull high.
Note 5-4: IF select serial RGB or CCIR601/656 input mode is selected, only DX0-DX7 used, and the other short
to GND, Only selected serial RGBΕCCIR601/656 interface, DX BUS will enable, Digital input mode
DX0 is LSB is MSB.
Note 5-5:Control the input data format
SPI timing Characteristics
Reference initial code:
Vgh,Vgl:(0x70,0x0003);//VGH=16.3V,VGL=-10.2V
VcomAC: (0x72,0x6164);
VcomDC: (0x70,0x0005);
PWM: (0x72,0xB4D4);//PWM=19.7(B/L)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7
AZDISPLAYS [ AZ DISPLAYS ]
