When the serial interface is selected (P/S=“L”), then D7
serves as the serial data input terminal (SI) and D6 serves as
the serial clock input terminal (SCL). At this time, D0 to D5 are
set to high impedance.
When the chip select is inactive, D0 to D7 are set to high
impedance.
16
17
18
19
20
D1
D2
D3
D4
D5
21 D6(SCL)
22 D7(SI)
Select the LCD driver duty
23
DUTY0
DUTY1
DUTY1
LCD driver duty
0
0
1/33
I
0
1
1
1
0
1
1/49
1/55
1/69
24
DUTY1
2.4 - 3.5V power supply input. These pads must be connected
each other.
Supply
Supply
25
26
27
28
29
30
31
32
33
34
VDD
VDD2
VSS
This is the power supply for the step-up voltage circuit for the
LCD. These pads must be connected each other.
Supply Ground output for pad option.
DC/DC voltage converter output
VOUT
NC
O
NC
O
Capacitor 3+ pad for internal DC/DC voltage converter.
Capacitor 1- pad for internal DC/DC voltage converter.
Capacitor 1+ pad for internal DC/DC voltage converter.
Capacitor 2+ pad for internal DC/DC voltage converter.
Capacitor 2- pad for internal DC/DC voltage converter.
CAP3+
CAP1-
CAP1+
CAP2+
CAP2-
O
O
O
O
This is the external input reference voltage (VREF) for the
internal voltage regulator. It is valid only when external VREF
is used. VEXT must be ³ 2.4V and £ VDD2. When using
internal VREF, this pad must be NC.
35
VEXT
I
Page 4