UVEPROM
SMJ27C010A
AS27C010A
Austin Semiconductor, Inc.
CAPACITANCE OVER RECOMMENDED RANGES OF SUPPLY VOLTAGE AND OPER-
ATING FREE-AIR TEMPERATURE, f = 1MHz*
PARAMETER
TEST CONDITIONS TYP**
MAX
UNIT
4
6
8
pF
CI
VI = 0V, f = 1MHz
VO = 0V, f= 1 MHz
Input capacitance
10
pF
CO
Output capacitance
* Capacitance measurements are made on sample basis only.
**All typical values are at TA = 25°C and nominal voltages.
SWITCHING CHARACTERISTICS OVER RECOMMENDED RANGES OF
OPERATING CONDITIONS1,2
-15
-20
-12
TEST
CONDITIONS
PARAMETER
UNIT
MIN MAX MIN MAX MIN MAX
Access time from address
120
120
55
150
150
75
200
200
75
ns
ns
ns
ta(A)
ta(E)
CL = 100pF
Access time from chip enable
1 Series 74
TTL Load,
Output enable time from G\
ten(G)
Output disable time from G\ or E\, whichever
occurs first3
Output data valid time after change of
address, E\, or G\, whichever occurs first3
tdis
0
0
50
0
0
60
0
0
60
ns
ns
Input tr < 20ns,
Input tf < 20ns
tv(A)
NOTES:
1. For all switching characteristics, the input pulse levels are 0.4V to 2.4V. Timing measurements are made at 2V for logic high and 0.8V for logic low.
(Reference AC testing waveform)
2. Common test conditions apply for tdis except during programming.
3. Value calculated from 0.5V delta to measured output level.
SWITCHING CHARACTERISTICS FOR PROGRAMMING: VCC = 6.5V and VPP = 13V
(SNAP! Pulse), TA = 25°C1
PARAMETER
MIN
MAX
UNIT
Disable, Output disable time from G\
0
130
ns
tdis(G)
ten(G)
Enable, Output enable time from G\
150
ns
NOTE: 1. For all switching characteristics, the input pulse levels are 0.4V to 2.4V. Timing measurements are made at 2V for logic high and 0.8V for logic low
(reference AC testing waveform).
TIMING REQUIREMENTS FOR PROGRAMMING
MIN
TYP
MAX
UNIT
Pulse duration, program
Setup Time, Address
Setup Time, E\
SNAP! Pulse Programming Algorithm
95
100
105
µs
tw(PGM)
tsu(A)
2
2
2
2
2
2
0
2
µs
µs
µs
µs
µs
µs
µs
µs
tsu(E)
Setup Time, G\
tsu(G)
tsu(D)
tsu(Vpp)
tsu(Vcc)
th(A)
Setup Time, Data
Setup Time, VPP
Setup Time, VCC
Hold time, address
Hold time, data
th(D)
Austin Semiconductor, Inc. reserves the right to change products or specifications without notice.
SMJ27C010A
AS27C010A
Rev. 2.1 6/05
6