ATmega8(L)
Datasheet
Revision
History
Please note that the referring page numbers in this section are referred to this document. The
referring revision in this section are referring to the document revision.
Changes from Rev. 1. Updated the datasheet according to the Atmel new Brand Style Guide.
2486Z- 02/11 to
Rev. 2486AA- 02/2013
2.Removed the reference to “On-chip debugging” from the content.
3.Added “Electrical Characteristics – TA = -40°C to 105°C” on page 242.
4.Added “ATmega8 Typical Characteristics – TA = -40°C to 105°C” on page 282.
5.Updated “Ordering Information” on page 314.
Changes from Rev. 1. Updated the datasheet according to the Atmel new Brand Style Guide.
2486Y- 10/10 to
Rev. 2486Z- 02/11
2. Updated “Ordering Information” on page 314. Added Ordering Information for
“Tape & Reel” devices
Changes from Rev. 1. Max Rise/Fall time in Table 102 on page 239 has been corrected from 1.6ns to 1600ns.
2486X- 06/10 to
Rev. 2486Y- 10/10
2. Note is added to “Performing Page Erase by SPM” on page 209.
3. Updated/corrected several short-cuts and added some new ones.
4. Updated last page according to new standard.
Changes from Rev. 1. Updated “DC Characteristics” on page 235 with new VOL maximum value (0.9V and
0.6V).
2486W- 02/10 to
Rev. 2486X- 06/10
Changes from Rev. 1. Updated “ADC Characteristics” on page 241 with VINT maximum value (2.9V).
2486V- 05/09 to
Rev. 2486W- 02/10
Changes from Rev. 1. Updated “Errata” on page 318.
2486U- 08/08 to
2. Updated the last page with Atmel’s new adresses.
Rev. 2486V- 05/09
Changes from Rev. 1.
2486T- 05/08 to
Updated “DC Characteristics” on page 235 with ICC typical values.
Rev. 2486U- 08/08
320
2486AA–AVR–02/2013
ATMEL [ ATMEL ]
