1.
Description
The Atmel
®
ATF22V10B is a high-performance CMOS (electrically erasable) programmable logic device (PLD)
which utilizes the Atmel proven electrically erasable Flash memory technology. Speeds down to 7.5ns and power
dissipation as low as 10mA are offered. All speed ranges are specified over the full 5V
10% range for military and
industrial temperature ranges, and 5V
5% for commercial temperature ranges.
Several low-power options allow selection of the best solution for various types of power-limited applications. Each
of these options significantly reduces total system power and enhances system reliability.
2.
Absolute Maximum Ratings*
Temperature Under Bias .................-55°C to +125°C
Storage Temperature ......................-65°C to +150°C
Voltage on Any Pin with
Respect to Ground .......................... -2.0V to +7.0V
Voltage on Input Pins
with Respect to Ground
During Programming ..................... -2.0V to +14.0V
Programming Voltage with
Respect to Ground ........................ -2.0V to +14.0V
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Note:
1. Minimum voltage is -0.6V DC, which may under-
shoot to -2.0V for pulses of less than 20ns.
Maximum output pin voltage is V
CC
+ 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20ns.
3.
DC and AC Operating Conditions
Commercial
Operating Temperature
V
CC
Power Supply
Note:
1. The shaded devices are obsolete
0°C - 70°C
(Ambient)
5V 5%
Industrial
-40°C - 85°C
(Ambient)
5V 10%
Military
-55°C - 125°C
(Case)
5V 10%
2
Atmel ATF22V10B
0250M–PLD–7/10
ATMEL [ ATMEL CORPORATION ]
