欢迎访问ic37.com |
会员登录 免费注册
发布采购

1P503S 参数 Datasheet PDF下载

1P503S图片预览
型号: 1P503S
PDF下载: 下载PDF文件 查看货源
内容描述: 混合耦合器3分贝, 90Σ [Hybrid Couplers 3 dB, 90∑]
分类和应用: 射频和微波射频耦合器微波耦合器分离技术隔离技术
文件页数/大小: 3 页 / 361 K
品牌: ANAREN [ ANAREN MICROWAVE ]
 浏览型号1P503S的Datasheet PDF文件第1页浏览型号1P503S的Datasheet PDF文件第3页  
Model 1P503S  
Rev. A  
Typical Performance: 1.6 GHz. to 2.1 GHz.  
Coupling 1P503S  
-2.6  
Return Loss 1P503S  
0
-10  
-20  
-30  
-40  
-50  
-2.9  
-3.2  
-3.5  
-3.8  
1600  
1700  
1800  
1900  
2000  
2100  
1600  
1700  
1800  
1900  
2000  
2100  
Frequency (MHz)  
Frequency (MHz)  
Isolation 1P503S  
Phase Balance 1P503S  
-10  
-20  
-30  
-40  
-50  
-87  
-88  
-89  
-90  
-91  
-92  
-93  
1600  
1700  
1800  
1900  
2000  
2100  
1600  
1700  
1800  
1900  
2000  
2100  
Frequency (MHz)  
Frequency (MHz)  
AMPLITUDE BALANCE  
VSWR & ISOLATION  
3dB hybrids are a type of backward wave coupler. In the  
design of these couplers, the even mode impedance was  
chosen to ‘critically couple’ or slightly ‘over couple’ at mid  
band to maximize performance and bandwidth. The  
amplitude balance specification is defined as the  
difference (in dB) of the signals at the COUPLED port  
output and the DC port output, when compared to the  
average output level.  
Similar to phase balance, the VSWR and isolation of a  
coupler are theoretically perfect; where the input and  
output ports are perfectly matched and no power is  
coupled to the isolated port. In practice, factors  
associated with the design and manufacturing  
processes limit VSWR and isolation. The significant  
limitations are associated with limitations of building  
perfect 50  
transitions at the input and output ports of  
the device.  
PHASE BALANCE  
In theory, output ports of a backward wave hybrid coupler  
remain in perfect phase quadrature independent of  
INSERTION LOSS  
Coupler insertion loss is defined as the difference of the  
input power from the sum of the output power. In  
practice, loss is typically 0.20 dB. Specification limits  
are somewhat higher due to imperfect test conditions;  
as the couplers must be tested in fixtures, which  
negatively affect results.  
frequency.  
In practice, factors associated with the  
manufacturing processes slightly degrade performance.  
The specification is typical two to three degrees maximum  
although in practice, phase balance is statistically better  
o
than specified (<1 ).  
USA/Canada:  
Toll Free:  
Europe:  
(315) 432-8909  
(800) 544-2414  
+44 2392-232392  
Available on Tape and  
Reel For Pick and Place  
Manufacturing.