Model 1P503S
Rev. A
Hybrid Couplers
3 dB, 90°
Description
The 1P503S Pico Xinger is a low profile, miniature 3dB hybrid coupler in an
easy to use surface mount package designed for DCS and PCS
applications. The 1P503S is designed for balanced amplifiers, variable
phase shifters and attenuators, LNAs, signal distribution and is an ideal
solution for the ever-increasing demands of the wireless industry for smaller
printed circuit boards and high performance. Parts have been subjected to
rigorous qualification testing and units are 100% tested. They are
manufactured using materials with x and y thermal expansion coefficients
compatible with common substrates.
ELECTRICAL SPECIFICATIONS**
Insertion
Features:
Frequency
Isolation*
VSWR
Loss
•
•
•
•
1.7 – 2.0 GHz.
GHz
dB Min
dB Max
Max:1
DCS and PCS
Low Loss
1.7 – 1.8
18
0.25
0.25
1.28
1.28
High Isolation
1.8 – 2.0
Amplitude
Balance
dB Max
18
o
Phase
Balance
Degrees
Operating
Temp.
ºC
•
•
•
•
•
90 Quadrature
Power
ΘJC
Surface Mountable
Tape And Reel
Lead Free
Ave. CW Watts
ºC/Watt
27.5
± 0.45
± 0.30
± 3
± 3
30
30
-55 to +85
-55 to +85
100% Tested
27.5
**Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50 Ω nominal impedance. * See Anaren Application Note #AAN-231 for information on
how to improve RF performance on your printed circuit board Specifications subject to
change without notice.
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
±.005
±0.13
±.004
.054
[1.38
4X .020
[0.51
±.010
±0.25
.250
[6.35
±0.10
]
]
]
Pin 1
Pin 2
Pin 2
Pin 1
GND
±.010
±0.25
±.004
.200
[5.08
.120
±.008
±0.20
4X .040
SQ
]
±0.10
]
[3.05
]
[1.01
GND
Pin 4
Denotes Array
Number
Pin 3
Pin 3
±.004
±0.10
.170
[4.32
Pin 4
]
Dimensions are in Inches [Millimeters]
1P503S Mechanical Outline
Part Is Symmetric About All Axis
Tolerances are Non-Cumulative
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe
: