Analog Power
AM4840N
SPECIFICATIONS (TA = 25oC UNLESS OTHERWISE NOTED)
Limits
Min Typ Max
Parameter
Symbol
Test Conditions
Unit
Static
V
Gate-Threshold Voltage
Gate-Body Leakage
VGS(th)
IGSS
VDS = VGS, ID = 250 uA
VDS = 0 V, VGS = 20 V
1
±100 nA
VDS = 24 V, VGS = 0 V
VDS = 24 V, VGS = 0 V, TJ = 55oC
1
IDSS
Zero Gate Voltage Drain Current
uA
25
On-State Drain CurrentA
ID(on)
VDS = 5 V, VGS = 10 V
VGS = 10 V, ID = 9.7 A
20
A
22
Drain-Source On-ResistanceA
rDS(on)
mΩ
27
VGS = 4.5 V, ID = 8.8 A
Forward TranconductanceA
Diode Forward Voltage
gfs
VDS = 15 V, ID = 9.7 A
IS = 2.3 A, VGS = 0 V
40
S
VSD
0.7
V
Dynamicb
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Switching
Qg
Qgs
Qgd
12.5
2.6
V
DS = 15 V, VGS = 4.5 V,
nC
nS
ID = 9.7 A
4.6
Turn-On Delay Time
td(on)
tr
td(off)
tf
20
9
VDD = 25 V, RL = 25 Ω , I
GEN = 10 V
D
= 1 A,
Rise Time
V
Turn-Off Delay Time
Fall-Time
70
20
Notes
a.
b.
Pulse test: PW <= 300us duty cycle <= 2%.
Guaranteed by design, not subject to production testing.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and
actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur.
Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its
officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer.
2
Publication Order Number:
DS-AM4840_A
January, 2006 - Rev. A
PRELIMINARY