AAT1230/1230-1
18V 100mA Step-Up Converter
™
SwitchReg
General Description
Features
The AAT1230/1230-1 is a high frequency, high effi-
ciency boost converter capable of 18V maximum
output voltage. The internal power switch can deliv-
er 100mA load current. It is the ideal power solution
to power OLED, LCD, and CCD applications oper-
ating from a single cell lithium-ion battery.
•
•
•
•
•
VIN Range: 2.7V to 5.5V
Maximum Output: 18V @ 100mA
True Load Disconnect
Dynamic Voltage Control Options
Hysteretic Control
— No External Compensation Components
— Excellent Load Transient Response
— High Efficiency at Light Load
Up to 2MHz Switching Frequency
Ultra-Small Inductor and Capacitors
Integrated Low RDS(ON) MOSFET Switches
Up to 85% Efficiency
<1µA Shutdown Current
Integrated Soft Start
Two Turn-On Time Options
— AAT1230: TSS = 0.35ms
— AAT1230-1: TSS = 3.5ms
Cycle-by-Cycle Current Limit
Short-Circuit, Over-Temperature Protection
Available in TSOPJW-12 or TDFN34-16
Package
Hysteretic control provides up to 2MHz switching
frequency and fast response to load transients with
small, low-cost external components. The fully
integrated control IC simplifies the design while
reducing the total PCB footprint. The
AAT1230/1230-1 offers a true load disconnect fea-
ture which isolates the load from the power source
when EN/SET is pulled low. This eliminates leak-
age current and maintains zero voltage at the out-
put while disabled.
•
•
•
•
•
•
•
The output voltage can be dynamically set by acti-
vating one of two reference levels (FB1 or FB2)
through the SEL logic pin. Optionally, AnalogicTech’s
Simple Serial Control™ (S2Cwire™) single wire
interface provides dynamic programmability across
a wide output voltage range through the EN/SET pin.
•
•
•
•
-40°C to +85°C Temperature Range
The AAT1230/1230-1 are available in a Pb-free,
thermally-enhanced 16-pin 3x4mm TDFN low-pro-
file package or a Pb-free 12-pin TSOPJW package.
Applications
•
•
•
•
•
•
•
CCD Bias Circuit
Digital Still Cameras
LCD Bias Circuit
Mobile Handsets
MP3 Players
OLED Displays
PDAs and Notebook PCs
Typical Application
L1
D1
2.2µH
Schottky 18V @ 100mA
VP
LIN
VIN
C1
2.2µF
VBAT
3.6V
AAT1230/
AAT1230-1
R1
78.7kΩ
C2
2.2µF, 25V
SW
PGND
FB1
R2
562Ω
Enable/Set
Select
EN/SET
FB2
SEL
GND
R3
4.99kΩ
1230.2006.10.1.4
1
ANALOGICTECH [ ADVANCED ANALOGIC TECHNOLOGIES ]
