欢迎访问ic37.com |
会员登录 免费注册
发布采购

AS1528_1 参数 Datasheet PDF下载

AS1528_1图片预览
型号: AS1528_1
PDF下载: 下载PDF文件 查看货源
内容描述: 微功耗, 10位,下150ksps , ADC ,单端或差分 [Micro-Power, 10-Bit, 150ksps, ADC, Single Ended or Differential]
分类和应用:
文件页数/大小: 21 页 / 621 K
品牌: AMSCO [ AMS(艾迈斯) ]
 浏览型号AS1528_1的Datasheet PDF文件第8页浏览型号AS1528_1的Datasheet PDF文件第9页浏览型号AS1528_1的Datasheet PDF文件第10页浏览型号AS1528_1的Datasheet PDF文件第11页浏览型号AS1528_1的Datasheet PDF文件第13页浏览型号AS1528_1的Datasheet PDF文件第14页浏览型号AS1528_1的Datasheet PDF文件第15页浏览型号AS1528_1的Datasheet PDF文件第16页  
AS1528/AS1529  
Datasheet - Detailed Description  
Input Bandwidth  
The AS1528/AS1529 input tracking circuitry has a 20MHz small signal bandwidth, so it is possible to digitize high-  
speed transient events and measure periodic signals with bandwidths exceeding the AS1528/AS1529 sampling rate  
by using undersampling techniques.  
Note: To avoid high-frequency signals being aliased into the frequency band of interest, anti-alias filtering is recom-  
mended.  
Analog Input Protection  
Internal protection diodes that clamp the analog input to VDD and GND allow the analog input pins to swing from GND  
- 0.3V to VDD + 0.3V without damage. Both inputs must not exceed VDD by more than 50mV or be lower than GND by  
more than 50mV for accurate conversions.  
Note: If an off-channel analog input voltage exceeds the supply voltages, the input current should be limited to 2mA.  
Internal Clock  
The AS1528/AS1529 operate from an internal clock, which is accurate within 5% of the 4MHz clock rate. This results in  
a worst-case conversion time of 3.7µs. The internal clock releases the system microprocessor from running the SAR  
conversion clock and allows the conversion results to be read back at the processor’s convenience, at any clock rate  
from 0 to 8MHz.  
Output Data Format  
Figure 18 on page 11 and Figure 19 on page 11 illustrate the conversion timing for the AS1528/AS1529. The 10-bit  
conversion result is output in MSB-first format. Data on DOUT transitions on the falling edge of SCLK. All 10 bits must  
be clocked out before CNVST transitions again.  
For the AS1528, data is straight binary for unipolar mode and two’s complement for bipolar mode. For the AS1529,  
data is always straight binary.  
Transfer Function  
Figure 20 on page 12 shows the unipolar transfer function for the AS1528/AS1529. Figure 21 on page 13 shows the  
bipolar transfer function for the AS1528. Code transitions occur halfway between successive-integer LSB values.  
Figure 20. AS1528/AS1529 Unipolar Transfer Function  
Full Scale = VREF  
Zero Scale = GND  
1 LSB = VREF/4096  
Transition  
Full-Scale  
11...111  
11...110  
11....101  
00...011  
00...010  
00...001  
00...000  
0
1
2
3
FS-3/2 LSB FS  
Input Voltage (LSB)  
www.austriamicrosystems.com  
Revision 1.02  
12 - 21