AS1367
Datasheet - Electrical Characteristics
Table 3. Electrical Characteristics (Continued)
Symbol
Parameter
Conditions
Min Typ Max
Unit
Thermal Protection
Thermal Shutdown
TSHDN
160
20
ºC
ºC
Temperature
Thermal Shutdown
Hysteresis
ΔTSHDN
1. Dropout voltage = VIN - VOUT when VOUT is 100mV < VOUT for VIN = VOUT(NOM) + 0.5V (applies only to nominal
output voltages ≥ 2.5V).
2. Guaranteed by design.
3. The rise and fall time of the shutdown signal must not exceed 1ms.
4. The delay time is defined as time required to set VOUT to 95% of its final nominal value.
Note: All limits are guaranteed. The parameters with min and max values are guaranteed with production tests or
SQC (Statistical Quality Control) methods.
www.austriamicrosystems.com
Revision 1.02
5 - 14
AMSCO [ AMS(艾迈斯) ]
