AS1341
Datasheet - P i n o u t
4 Pinout
Pin Assignments
Figure 2. Pin Assignments (Top View)
FB 1
GND 2
8 OUT
7 SHDNN
AS1341
POK 3
LX 4
9
6 ILIMIT
5 IN
Pin Descriptions
Table 1. Pin Descriptions
Pin Number
1
2
3
4
5
6
7
8
9
Pin Name
FB
GND
POK
LX
IN
ILIMIT
SHDNN
OUT
NC
Note:
Connect pin POK to GND when the Power-Ok feature is not used.
Inductor Connection.
Connect this pin to an external inductor.
4.5V to 20V Input Supply Voltage
Peak Current Control Input.
Connect this pin to IN or GND to set peak current limit
Shutdown Input.
A low on this pin puts the AS1341 into shutdown mode. Supply
current is reduced to 0.8µA and LX goes high-impedance.
Regulated Output Voltage High-Impedance Sense Input.
For the fixed 5V output
connect this pin to V
OUT
. For adjustable output connect this pin to GND.
Exposed Pad.
This pad is not connected internally. Connect to GND or do not
connect.
Description
Feedback Input.
For the fixed 5V output connect this pin to GND. For adjustable
output, connect to a resistive divider between V
OUT
and GND to set the output voltage
between 1.25V and V
IN
.
Ground
Power OK.
Active-low open-drain reset output.
www.austriamicrosystems.com
Revision 1.05
2 - 17
AMSCO [ AUSTRIAMICROSYSTEMS AG ]
